![]() I'll choose "legacy boot mode" and press F10 to save and exit. The BIOS isn't saving my boot preferences. Windows 10 runs fine, but it will not boot using UEFI, so I have to use legacy. I used the media creation tool to create a bootable USB flash drive in order to perform a clean install. I had to set the BIOS to legacy in order to boot from a USB flash drive. It is also possible that parts of the BIOS are locked down (maybe that is the reason why your settings aren't saved, but check the security options, maybe you have to set/unset passwords Yes. They also often have very limited resources which you can't upgrade, for example 32GB eMMC disks, 2GB RAM etc. Often they have very limited BIOS's with hardly any selectable options, they often also use an EFI 32 System rather than EFI 64, that makes them less compatible & harder to setup. It also includes several EFI files within it's boot system, so it is likely that you can boot on hardware that often don't work with other utilities: These tablet devices like your HP stream have several problems. You can also include several iso's, & when you boot to the stick, it shows those iso's in a boot menu. After you have created the Ventoy USB stick, all you need to do is copy the complete iso over to it. Personally I use Ventoy to create my bootable USB sticks. UEFI boot is not possible if you use NTFS for Example. You probably have to format the USB for FAT32 though. But I'm not sure how the Media-Creation tool works. To create the boot media, you don't need a PC that supports UEFI. None of these partitions will be needed in a fresh install and may interfere or build up a disk junkyard if left undeleted. Here is the advice that I followed: Choose Custom Install, then to get it cleanest at the "Where do you want to install Windows?" screen (shown below) highlight each partition to select Delete. ![]() hakim: I followed the instructions on a site () that explained how to install Windows 10. Then, Boot your PC from the Installation Media you just created (change Boot Order in your BIOS) to begin installing Windows 10. download the Media Creation Tool (Click on Download Tool Now), with that you can download the latest Windows 10 ISO (Select Create Installation Media for Another PC), you can create a bootable USB flash drive (min 8GB) using that tool. I followed the instructions on a site () which said to use another computer to create the bootable USB flash drive. I did check the Inspiron's BIOS and there was no option to choose between UEFI mode and legacy. The Inspiron's BIOS build date was 11-21-11. I used a Dell Inspiron to create the USB flash drive. ![]() Windows 10 would not install more updates because of the lack of space. I used another computer to create the USB flash drive because the stream had very little free space. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |